document number: 28744 for technical questions, contact: specialresistors@vishay.com www.vishay.com revision: 11-jun-12 361 mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01, mca 1206 vg01 vishay beyschlag thin film chip resistors with established reliability this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01 and mca 1206 vg01 thin film flat chip resistors with established reliability are the perfect choice for all high-reliability applications typically found in military, aircraft and spacecraft electronics. these versions supplement the families of professional and precision thin film flat chip resistors mcs 0402, mct 0603, mcu 0805 and mca 1206. features ? approved to en 140401-801, version e ? established reliability, failure rate level e6 ? advanced thin film technology ? pure sn termination on ni barrier layer ? single lot date code ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? military ? avionics ? space notes ? these resistors do not feature a limited lifetime when operated wi thin the permissible limits. ho wever, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the spec ific application, thereby es tablishing a functional lifeti me. ? the failure rate level e6 (10 -6 /h, ? q = 0.3), corresponding to mil level p, is superior to level e5 (10 -5 /h, ? q = 1) and thus may be used as a replacement. metric size imperial 0402 0603 0805 1206 en/cecc rr1005m rr1608m rr2012m rr3216m technical specifications description mcs 0402 vg01 mct 0603 vg01 mcu 0805 vg01 mca 1206 vg01 en/cecc style (size) rr1005m rr1608m rr2012m rr3216m resistance range 10 ? to 1 m ? ; 0 ? 1 ? to 1 m ? ; 0 ? resistance tolerance 1 %; 0.1 % temperature coefficient 50 ppm/k; 15 ppm/k rated dissipation, p 70 0.063 w 0.1 w 0.125 w 0.25 w operating voltage, u max. ac/dc 50 v 75 v 150 v 200 v permissible film temperature, ? f max. 125 ? c operating temperature range - 55 c to 125 c max. resistance change at p 70 for resistance range, | ? r / r| max. after: 10 ? to 1 m ? 1 ? to 1 m ? 1000 h ? 0.25 % 8000 h ? 0.5 % 225 000 h ? 1.5 % permissible voltage against ambient (insulation): 1 min; u ins 75 v 100 v 200 v 300 v continuous 75 v 75 v 75 v 75 v assessed failure rate level e6 = 10 -6 /h quality factor, ? q 0.3 failure rate: fit observed < 0.1 x 10 -9 /h
www.vishay.com for technical questions, contact: specialresistors@vishay.com document number: 28744 362 revision: 11-jun-12 mcs 0402 vg01, mct 0603 vg01 , mcu 0805 vg01, mca 1206 vg01 vishay beyschlag thin film chip resistor s with established reliability this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? the products can be ordered us ing either the part number or the product description. ? products within a packaging unit are single lot date code. part number and product description part number: mct0603hc2873fp500 part number: mct0603hz0000zp500 type/size version tcr resistance tolerance packaging mcs 0402 mct 0603 mcu 0805 mca 1206 h = en 140401-801, ?version e?; failure rate level e6 c = 50 ppm/k e = 15 ppm/k z = jumper 3 digit value 1 digit multiplier multiplier 8 = *10 -2 9 = *10 -1 0 = *10 0 1 = *10 1 2 = *10 2 3 = *10 3 4 = *10 4 0000 = jumper f = 1 % b = 0.1 % z = jumper e1 e0 p1 p5 product description: mct 0603-50 1 % vg01 p5 287k product description: mct 0603 vg01 p5 0r0 mct 0603 -50 1 % vg01 p5 287k mct 0603 - - vg01 p5 0r0 type/size tcr tolerance version packaging resistance mcs 0402 mct 0603 mcu 0805 mca 1206 50 ppm/k 15 ppm/k 1 % 0.1 % vg01 = en 140401-801, ?version e?; failure rate level e6 e1 e0 p1 p5 49r9 = 49.9 ? 287k = 287 k ? 0r0 = jumper m c t 0 6 0 3 h z 0 0 0 0 z p 5 0 0 m c t 0 6 0 3 h c 2 8 7 3 f p 5 0 0
document number: 28744 for technical questions, contact: specialresistors@vishay.com www.vishay.com revision: 11-jun-12 363 mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01, mca 1206 vg01 thin film chip resistors with established reliability vishay beyschlag this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? the ordering information according to en 140401-801:2007 shown abov e succeeds and replaces the or dering information according to earlier versions of the detail specific ation en 140401-801 or its predecessor cecc 40401-801, for example: cecc 40401-801 ez rr1608m c 287k f e6 cecc 40401-801 s rr1608m c 287k f e6 with ez; s assessment level, where ez is successor to and superior replacement for s rr1608m style, with suffix m for ?metric? c temperature coefficient, accordi ng to the detail specification c = 50 ppm/k; e = 15 ppm/k note ? according to en 140401-801, resistance values are to be selected from the e96 series for 1 % tolerance and from the e192 serie s for 0.1 % tolerance. en 140401-801 ordering information example of the ordering information for a resistor: mct 0603-50 1 % vg01 287k en140401-801ezrr1608mr287kfe6 example of the ordering information for a zero ohm jumper: mct 0603 vg01 0r0 en140401-801ezrr1608m-0r00-e6 the elements used in the component number have the following meaning: en140401-801 ez rr1608m r 287k f e6 en detail specification number assessment level for the zero-defect approach style (size) temperature coefficient, according to en 60062 r = 50 ppm/k; p = 15 ppm/k resistance, according to en 60062, 4 characters tolerance on rated resistance, according to en 60062 f = 1 %; b = 0.1 % failure rate level according to en 60115-1, annex zr temperature coefficient and resistance range description resistance tcr tolerance mcs 0402 vg01 mct 0603 vg01 mcu 0805 vg01 mca 1206 vg01 50 ppm/k 1 % 10 ? to 1 m ? 1 ? to 1 m ? 1 ? to 1 m ? 1 ? to 1 m ? 15 ppm/k 0.1 % 100 ? to 33.2 k ? 100 ? to 47.5 k ? 100 ? to 100 k ? 43.2 ? to 332 k ? jumper ?? 20 m ?? i max. = 0.63 a ?? 20 m ?? i max. = 1 a ?? 20 m ?? i max. = 1.5 a ?? 20 m ?? i max. = 2 a packaging type code quantity carrier tape width pitch reel diameter mcs 0402 vg01 e1 1000 paper tape acc. iec 60286-3 type i 8 mm 2 mm 180 mm/7" e0 10 000 mct 0603 vg01 p1 1000 8 mm 4 mm p5 5000 mcu 0805 vg01 p1 1000 p5 5000 mca 1206 vg01 p1 1000 p5 5000
www.vishay.com for technical questions, contact: specialresistors@vishay.com document number: 28744 364 revision: 11-jun-12 mcs 0402 vg01, mct 0603 vg01 , mcu 0805 vg01, mca 1206 vg01 vishay beyschlag thin film chip resistor s with established reliability this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions note ? resistors mca 1206 vg01 and mcu 0805 vg01 are marked using to the four-character code system of iec 60062, 4.2.3. resistors mct 0603 vg01 and mcs 0402 vg01 do not show any marking on their light blue protective coating. note ? the given solder pad dimensions reflect the considerations for board design and assemb ly as outlined e.g. in standards iec 611 88-5-x, or in publication ipc 7351. they do not guarant ee any supposed thermal properti es, however, they will be found adequate for most gene ral applications. dimensions and mass type h (mm) l (mm) w (mm) w t (mm) t b (mm) t t (mm) mass (mg) mcs 0402 vg01 0.32 0.05 1.0 0.05 0.5 0.05 > 75 % of w 0.2 0.1 0.2 + 0.1/- 0.15 0.6 mct 0603 vg01 0.45 + 0.1/- 0.05 1.55 0.05 0.85 0.1 0.3 + 0.15/- 0.2 1.9 mcu 0805 vg01 0.45 + 0.1/- 0.05 2.0 0.1 1.25 0.15 0.4 + 0.1/- 0.2 4.6 mca 1206 vg01 0.55 0.1 3.2 + 0.1/- 0.2 1.6 0.15 0.5 0.25 9.2 recommended solder pad dimensions type wave soldering reflow soldering g (mm) y (mm) x (mm) z (mm) g (mm) y (mm) x (mm) z (mm) mcs 0402 vg01 - - - - 0.35 0.55 0.55 1.45 mct 0603 vg01 0.55 1.10 1.10 2.75 0.65 0.70 0.95 2.05 mcu 0805 vg01 0.80 1.25 1.50 3.30 0.90 0.90 1.40 2.70 mca 1206 vg01 1.40 1.50 1.90 4.40 1.50 1.15 1.75 3.80 t t l w t b h w t g x y z
document number: 28744 for technical questions, contact: specialresistors@vishay.com www.vishay.com revision: 11-jun-12 365 mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01, mca 1206 vg01 thin film chip resistors with established reliability vishay beyschlag this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 description production is strictly controlled and follows an extensive set of instructions established for reproducibility. a homogeneous film of metal alloy is deposited on a high grade ceramic (al 2 o 3 ) substrate and conditioned to achieve the desired temperature coeffi cient. specially designed inner contacts are deposited on both sides. a special laser is used to achieve the target value by smoothly cutting a meander groove in the resistive layer without damaging the ceramics. for the high ohmic range, optimized cermet products provide comparable properties. the resistor elements are covered by a protective coating designed for electrical, mechanical and climatic protection. the te rminations receive a final pure tin on nickel plating. the result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. this includes pulse load screening for the elimination of products with a potential risk of early life failures according to en 140401-801, 2.1.2.2 (feasible for r ? 10 ? ). only accepted products are laid directly into the paper tape in accordance with en 60286-3 (3) , type i . products within a packaging unit are from the same production lot and carry the same date code. assembly the resistors are suitable for processing on automatic smd assembly systems. they are su itable for automa tic soldering using wave, reflow or vapour phase as shown in iec 61760-1 (3) . solderability is specified for 2 years after production or requalification. the permitted storage time is 20 years. the resistors are rohs compliant; the pure tin plating provides compatibility with lead (pb)-free soldering processes. the immunity of the plating against tin whisker growth has been proven under extensive testing. the encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. the suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. all products comply with the gadsl (1) and the cefic-eeca-eicta (2) list of legal restrictions on hazardous substances. this includes full compliance with the following directives: ? 2000/53/ec end of vehicle life directive (elv) and annex ii (elv ii) ? 2011/65/eu restriction of the use of hazardous substances directive (rohs) ? 2002/96/ec waste electrical and electronic equipment directive (weee) approvals the resistors are approved wit hin the iecq-cecc quality assessment system for electronic components to the detail specification en 140401-801 which refers to en 60115-1 , en 140400 and the variety of environmental test procedures of the iec 60068 (3) series. conformity is attested by the use of the cecc logo ( ) as the mark of conformity on the package label. vishay beyschlag has achieved ?approval of manufacturer? in accordance with iec qc 001002-3, clause 2 . the release certificate for ?technology approval schedule? in accordance with cecc 240001 based on iec qc 001002-3, clause 6 is granted for the vishay beyschlag manufacturing process. the vishay beyschlag produc tion facility is registered with the cage code d9539. related products a wider range of tcr, tolerance and resistance values, plus the option of values from a diff erent e series is available with products approved to en 140401-801 , version a, without established reliability, nominal failure rate level e0 (quality factor ? q = 3). see the datasheets: ? ?professional flat chip resistors? ( www.vishay.com/doc?28705 ) ? ?precision flat chip resistors? ( www.vishay.com/doc?28700 ) notes (1) global automotive declarable substance list, see www.gadsl.org . (2) cefic (european chemical industry council) , eeca (european electronic component manufac turers association) , eicta (european tra de organisation representing the inform ation and communications technology and consumer electronics), see www.eicta.org/index.ph p?id=1053&id_article=340 . (3) the quoted iec standards are also rel eased as en standards with the same number and identical contents.
www.vishay.com for technical questions, contact: specialresistors@vishay.com document number: 28744 366 revision: 11-jun-12 mcs 0402 vg01, mct 0603 vg01 , mcu 0805 vg01, mca 1206 vg01 vishay beyschlag thin film chip resistor s with established reliability this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 functional performance 100 - 50 150 0 0.1 power dissipation in w p 050 ambient temperature amb ? 0.2 0.3 70 mca 1206 v g01 mcu 0 8 05 v g01 mct 0603 v g01 mcs 0402 v g01 125 deratin g c 100 0.01 0.1 1k 10k 1 100k mca 1206 v g01 mcu 0 8 05 v g01 mct 0603 v g01 mcs 0402 v g01 resistance value current noise a 1 r 1m v / v in accordance w ith iec 60195 current noise - 1 a 10 100 1k 120 10k resistance value r 1m db in accordance w ith iec/tr 60440 100 8 0 60 40 100k non-linearity 3 a non-linearity - 3 a mca 1206 v g01 mcu 0 8 05 v g01 mct 0603 v g01 mcs 0402 v g01
document number: 28744 for technical questions, contact: specialresistors@vishay.com www.vishay.com revision: 11-jun-12 367 mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01, mca 1206 vg01 thin film chip resistors with established reliability vishay beyschlag this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 functional performance further information on the performance of these products is given in the following datasheets: ? ?professional flat chip resistors?, document no. 28705 ? ?precision flat chip resistors?, document no. 28700 tests and requirements all tests are carried out in accordance with the following specifications: en 60115-1, generic specification en 140400, sectional specification en 140401-801, detail specification for further information on t he tests and requirements of these products please refer to the specifications mentioned above, and to the following datasheets: ? ?professional flat chip resistors? ( www.vishay.com/doc?28705 ) ? ?precision flat chip resistors? ( www.vishay.com/doc?28700 ) historical 12nc information ? the resistors had a 12-digit code starting with 2312 ? the subsequent 4 digits indicated the resistor type, specification and packaging; see the 12nc table ? the remaining 4 digits indicate the resistance value: - the first 3 digits indicated the resistance value - the last digit indicated the resistance decade in accordance with the resistance decade table resistance decade historical 12nc example the 12nc of a mct 0603 vg01 resistor, value 287k and tcr 50 with 1 % tolerance, supplied in cardboard tape of 5000 units per reel was: 2312 215 02874. resistance decade last digit 1 ? to 9.99 ? 8 10 ?? to 99.9 ? 9 100 ?? to 999 ? 1 1 k ? to 9.99 k ? 2 10 k ? to 99.9 k ? 3 100 k ? to 999 k ? 4 1m ? 5 historical 12nc - resistor type and packaging description 2312 ... ..... cardboard tape on reel type tcr tol. e1 1000 pieces e0 10 000 pieces mcs 0402 vg01 50 ppm/k 1 % 260 0.... 275 0.... 15 ppm/k 0.1 % 262 0.... 277 0.... jumper 262 90001 277 90001 type tcr tol. p1 1000 pieces p5 5000 pieces pw 20 000 pieces mct 0603 vg01 50 ppm/k 1 % 200 0.... 215 0.... 205 0.... 15 ppm/k 0.1 % 202 0.... 217 0.... - jumper 202 90001 217 90001 207 90001 mcu 0805 vg01 50 ppm/k 1 % 240 0.... 255 0.... 245 0.... 15 ppm/k 0.1 % 242 0.... 257 0.... - jumper 242 90001 257 90001 247 90001 mca 1206 vg01 50 ppm/k 1 % no 12nc assigned to mca 1206 vg01 15 ppm/k 0.1 % jumper
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
